Description
The Taurus 3 Accessory Kit includes the following:
- Straight Edge
- 30/60 Degree Cutoff Triangle
- 45 Degree Cutoff Triangle
- Bevel Edge Maker
- Circle Maker
- Lamp Wedge
The Straight Edge: This tool gives the ability to cut straight lines, which would ordinarily be very difficult, with your ring saw.
30/60 Degree Cutoff Triangle: Works in unison with the straight edge to cut a 30 or 60 degree angle.
45 Degree Cutoff Triangle: Works in unison with the straight edge to cut a 45 degree angle.
Bevel Edge Maker: This works in unison with the straight edge to make perfect 45 degree beveled edges.
Circle Maker: This item works on any location of the work surface and helps to create perfect circles.
Lamp Wedge: Use the lamp wedge to put a 30 degree bevel on the edge of a finished piece. This will allow the pieces to fit together more tightly, allowing for a smaller, stronger solder joint.
CALIFORNIA PROP 65 WARNING STATEMENT: This product contains polycarbonate, styrene, and urethane. These substances are known to the State of California to cause cancer, birth defects and other reproductive harm. See www.P65Warnings.ca.gov for additional information.
It is recommended that appropriate personal protective equipment (PPE), such as respirators and gloves, be used when handling Gemini “ring saws” to minimize any potential exposures either to the saw or to the materials you are cutting. Clean the water after each use when cutting dangerous or suspicious materials. Wash your hands and face thoroughly after use.
Reviews
There are no reviews yet.